Ideal Temperatures To Set Your Thermostat To

The ideal thermostat settings depend on a number of factors, including time of day, level of activity, weather severity, number of room occupants and personal preferences. All of these factors must be considered to get the best results in terms of comfort and energy savings.


In the wintertime, going about the day indoors at 68°F is ideal. It keeps everyone comfortable despite the subzero temperatures outside without overly taxing the heaters. Savings can be gained by letting the temperature drop a little between 9 am to 5am which is the traditional time when people are in their offices and schools. A drop of 15 degrees is reasonable. It keeps the house relatively warm. The temperature can be pulled up again after residents go back from their work and school duties.


In the summertime, a thermostat setting of 78°F will not be out of place. It is considerably cooler than noontime peaks of around 100°F or more in certain regions. Again, this can be adjusted to warmer temperatures during office hours when the house is empty, except possibly for pets. The same is true for bedtime since sleep is a largely sedentary activity. The body is easier to cool down at this point than at any other time during the day. What’s more, a low temperature setting will only make it harder to get up in the morning as it will feel very chilly.

Importance Of A Thermostat

All of these adjustments can be difficult to keep track of. Install a programmable thermostat to keep life simple. These small and inexpensive units can be programmed to change the temperature in a room automatically depending on the time of the day. Enter the average ideal thermostat settings for the season and let it do the work.

A good thing about programmable thermostats is that although they can change the temperature automatically, the values are not set in stone. Homeowners can quickly override the settings for an unusually hot day or a particularly chilly evening. These may not happen often, but it’s nice to know that you can make the adjustments on the fly if you need to.

Keep following our blog for more heating and air conditioning tips.

What Is Carbon Monoxide Poisoning?

Carbon monoxide is a colorless, odorless gas that can kill. It is present in fumes produced when one burns fuel in stoves, lanterns, fireplaces, grills, furnaces, gas ranges, small engines, or vehicles. Carbon monoxide poisoning can lead to brain damage and even death; unfortunately, people cannot see it, taste it, or smell it. Early symptoms of carbon monoxide poisoning, such as fatigue, nausea, and headaches, are often mistaken for the flu. Poisoning occurs when the gas builds up in a person’s bloodstream, thereby replacing the oxygen in the red blood cells. Carbon monoxide is such an insidious killer that people who are drunk or sleeping can die before they have symptoms. Other symptoms and signs of carbon monoxide poisoning include:
• Dizziness
• Weakness
• Shortness of breath
• Blurred vision
• Confusion
• Chest pain
• Loss of consciousness

Everyone is at risk of carbon monoxide poisoning; however, it is particularly dangerous for unborn babies, children, and the elderly. Since fetal blood cells absorb carbon monoxide more readily than adult blood cells do, unborn babies are more susceptible to poisoning. Young children are also susceptible because they take breaths much more frequently that adults do. Older adults are more likely to develop brain damage due to carbon monoxide exposure.

How to Prevent Carbon Monoxide Poisoning in your Home
• Install a battery back–up or battery–operated carbon monoxide detector.
• Have the water heater, heating system, and other coal, oil, or gas operated appliances and equipment serviced by a qualified and experienced HVAC technician annually.
• Avoid using portable flameless chemical heaters inside the house.
• Any strange odor from a gas refrigerator should be checked out by an expert.
• Only buy gas equipment carrying the seal of a reputable testing agency.
• Make sure all gas appliances are vented properly.
• Have the chimney inspected and checked every year.
• Never patch up a vent pipe with gum, tape, or something else.
• Avoid using the over or gas range for heating.
• Never burn charcoal indoors.
• Never use a generator inside the home garage, or basement.

Each year, hundreds of Americans die from unintentional carbon monoxide poisoning not linked to fires, and more than 20,000 visit emergency rooms. People who notice symptoms of carbon monoxide poisoning should go outside immediately and call for emergency medical help. Call us for all heating and air conditioning needs.

The True Difference Between EER Ratings And SEER Ratings

If you have purchased AC systems or have worked with some for a while, you probably have wondered what the big different between EER ratings and SEER ratings is. These two ratings are used frequently and one substitutes the other at times. But what is the real difference between the two?

The EER Measure

The EER rating (Energy Efficiency Rating) is a system used to measure how many watts of power are used for an AC to produce about 1 Btu/h of cooling power under fixed conditions. The EER ratings were the first ever used system to rate air conditioner efficiency and were appreciated for how simple it was to calculate with it.

However, technicians saw an error in the same system because it did not account for those ACs that took a while to reach peak cooling power when turned on. Thus the EER rating was revised and some changes made to what is a now SEER rating.

The SEER Measure

In full, it is known as the Seasonal Energy Efficiency Rating. This system deviates from the norm of measuring energy efficiency under a constant operating temperature. To calculate SEER ratings, one has to measure how much energy is saved whenever the AC is in the cooling period; these measurements are taken under varying temperatures.

Thus, as EER ratings measure energy efficiency at constant temperature, SEER ratings take the same measurements under different temperature then average the resulting figure.

So Which Should You Use?

The standard way of taking Btu/h ratings is using SEER ratings, though the EER ratings also come to play in a lot of situations. Whichever you choose will depend on the temperature conditions in each season. For example, the EER ratings will be more efficient during summer when the temperatures are at a constant high. On the other hand, in areas where temperatures are moderate and often fluctuate during the day, the SEER ratings will be most accurate.

That is the major difference between EER ratings and SEER ratings. For more information on efficient heating and air conditioning options, feel free to call us today.

Reasons To Invest In A Whole Home Electrical Suppressor

Electricity over surge in a house may lead to disastrous outcomes. It may destroy many electrical devices which may result into unplanned for expenses repairing or replacing these devices. You may eliminate the chances of this happening by installing one surge protector for your whole home. This regulates the amount of electricity coming into your home and thus there will be minimal chances of an over surge in the house.

Every home requires a whole home electrical suppressor for the following reasons. There are numerous electrical appliances with circuit boards. These can be easily destroyed by an electrical over surge from the main power line. To protect all these devices from being destroyed, you will need to install a whole home electrical suppressor.

Most electrical surges in a home are internally generated. This means that the negligible surges that our electrical devices introduce into the system build over time. This causes degradation of the efficiency of these devices. This means that devices that would have lasted for several decades will last much shorter. To prevent this, you will require a whole home electrical suppressor.

Perhaps some of your devices may share an electric socket. This means that a surge by one of the devices will negatively affect all those devices. This can be prevented by layering the surge protector. The layering will be two-leveled: one at the sockets or any other point of service and at the electric service level to protect the whole home. This prevents other devices from being affected by a surge produced by another since not all devices are responsible for the surges we are talking about.

Now, some may ask why you may require a whole house suppressor when the electrical surges are only produced by a few devices. The reason is that even if the devices introduce the surge to the circuit, this surge will not just affect that device, it will affect everything electronic in the circuit. This means that you may be experiencing damaged equipment once in a while. Therefore, in order to reduce this, you should install the whole house electrical suppressor.

Electrical surges may even lead to electrical shocks to people in the house especially when running hot water showers or sinks. This may affect their general health in the long run. It is very important to ensure that your home’s electrical devices are protected from harm. For any questions, clarification or any other HVAC need, contact us.

Viable Factors To Consider When Choosing New Air Conditioner Or Heater

The choice of a heater or air conditioner for your home or building is an important decision to make. Therefore care must be taken to avoid making rush decisions that will have negative effects on your life. With this in mind, we have prepared a list of things that you should always consider when choosing a new heater or when choosing new air conditioner.

The refrigerant in use is always useful. With regulations on environmental friendly use of resources, it is wise to avoid refrigerants that deplete the ozone layer thus contributing largely to global warming and climate change. Efficient and environmental friendly refrigerants like R410a should be used. This will ensure you observe your responsibility to your environment and at the same time leading a quality life.

Maintenance is usually a consideration that you cannot avoid. Different systems will require different levels of maintenance. There are companies that will offer maintenance for their products for a specified period of time. These are very good companies to work with as they ensure the system remains highly efficient at all time. When these contracts are over, you are required to continue maintaining the equipment as required for best results.

The cost of the system is a major thing to look out for. This is to make sure that the buyer gets value for their money. Therefore, you may be required to compare prices offered by different manufacturers or sellers and make the best choice. With this in mind, it is wise to browse through information on different products, their manufacturers and sellers and make an informed choice.

Refund opportunities are usually not considered when choosing new air conditioner. However, they may be useful to you since you may end up choosing a heater that will not work well in your building. It is advisable to find out more about any refund programs set up by the state or even by the manufacturers. It would be sad to lose out on getting a refund on a very expensive piece when the state can refund a certain percentage or even the whole amount of purchase.

The efficiency rating of the system when choosing a new heater should be highly put in mind. This has a direct effect on the level of electricity or energy consumption and therefore the extent of your power bills. Choosing new air conditioner should therefore be guided by the energy efficiency. The rating is usually indicated but if not, you can always ask the seller.

Decision making when it comes to choosing a new heater or choosing new air conditioner may present several challenges. That is why experts in this field are readily available to guide you and make sure you are fully satisfied with the decision you make. If you require some consultation, please find time and call us. We will readily help you with what you need.

How Air Conditioners Work: Phase Conversion And Phase Transition

How does air conditioning work

The main job that an air conditioner performs is to cool the interior air. The system performs this following the principle of phase conversion where a liquid is converted into a gaseous state, thereby absorbing the heat and cooling the surrounding air.

The air conditioners use a spiral coil filled with refrigerants which are liquids with compounds that force the air that comes in contact into them to convert into gas. The interior air enters the system and is fanned over the evaporator coil by a special fan attached to the system. As the liquid turns into gas, it takes off the heat off the air and the outgoing air that is released into the atmosphere is cooler and more fresh. AC systems also use a humidifier which absorbs the moisture off the air and thereby absorbing some part of the heat, too.

However, a humidifier is not part of the central function of an AC, one of which is the phase conversion process just described above. The other end of the process involves turning the gas back into liquid again, so that the cycle can continue uninterrupted. This process is called phase transition. The component that plays the main part in this process is called compressor. This is an electric pump which uses high pressure to convert gas into liquid. The heat generated as part of this process is vented through a duct system into the outside air, so that the indoor air does not get affected by it anyway.

In the central air conditioning system, the compressor and the condenser are fitted into a separate unit which is installed outdoors. However, in the case of window systems the compressor section is fitted towards the outside while the evaporator and the coil part lies at the front of the system so that the cooled air can directly go back indoors.

We are a company providing air conditioning and heating system needs to a large base of clients for a long time. Give us a call today for any servicing, repair and maintenance job on AC, furnace, or heating systems or any other HVAC needs, or if you need any additional information on how air conditioners work.

Will HVAC Efficiency Standards Go Up?

Indoor heating, cooling and air ventilation is important for high-quality indoor air. Most HVAC (heating, ventilation and air conditioning) equipments consume energy, whether electrical, gas, coal or wood among other fuels. The U.S energy department, together with other HVAC experts, have been working on preserving the environment through new energy efficiency rules and consumer encouragement actions for reduced energy consumption.

HVAC efficiency standards

Efficiency standards for HVAC equipments might or might not go up soon. HVAC experts, together with the US department of energy, proposed a raise of the efficiency standards to 90 by 2013, in 2009. Annual fuel utilization energy of 90 means that the HVAC equipment utilizes 90% of the energy it consumes to give the desired heating, cooling or air conditioning. Current AFUE stands at 78.

The move to raise efficiency standards was met with mixed reactions. New building owners and the local government figured that this move would save consumers money, as they would not lose much energy through the use of their HVAC equipments, and the government would contribute towards energy saving through reduced national energy consumption. Whereas initial acquisition and installation of new high-efficiency HVAC equipments might cost consumers and building owners more money than the current systems, the gradually saved energy would reduce overall energy consumption.

Challenges that face the increase in efficiency standards

Owners of buildings with old HVAC systems find the move to raise efficiency standards inconveniencing in terms of cost and time. The new high-energy efficient equipments do not have the same ventilation systems as the old ones, and that would need an absolute demotion of the existing systems’ ventilation, and installation of new systems’ ventilation. The demolition and installation of new HVAC systems’ ventilation would cost a lot of money and take up time. For these people, retaining their less-energy efficiency equipments seem cost effective, and that is why such are the groups moved to challenge the increase in efficiency standards for HVAC equipments.


It is not yet known whether or not standards for HVAC equipment will go up as proposed by the US department of Energy, in 2009. The move was supposed to be implemented by 2013, but its opponents felt it would be inconveniencing and costly to people who have older HVAC systems. Whether the motion to raise these standards passes or not, all consumers should ensure their HVAC (assessment of HVAC needs, acquisition, repair, servicing and replacement of HVAC equipments) services are conducted by qualified and licensed HVAC contractors.

Is Your HVAC System Protected From Power Surges?

Although many consider it a luxury, your home’s HVAC system is a modern convenience and a comfort. It keeps your home at just the right temperature, no matter the season, so anyone who enters can be comfortable. You probably know that from time to time this system needs repairs and HVAC maintenance, but do you know that it needs power surge protection? Many homeowners worry about protecting their printers, computers, and televisions from power surges, but fail to protect an even more expensive and valuable item; their HVAC system. For an HVAC system, damage from lightning or an electric surge can be quite expensive.

Home Power Surge Protection
Power surges can be caused by storms, lightning, repair work on power lines, accidents, and even from appliances in the home. Electrical power surges can affect nearly every electrical piece of equipment in your home; from your coffee maker to your computer, your doorbell to your television, your HVAC system to your hot water heater. Nothing is safe from a power surge. To protect smaller items, some homeowners purchase specialized outlets or even power strips that promise to protect against electrical power surges. However, most homeowners do not think to protect their home utilities, such as their boiler, furnace, air conditioning unit, and HVAC system. This can be a very costly mistake.

Protect Your Home Utilities
The warranty on your HVAC system does not generally cover any damages or repairs needed due to a power surge or lightning strike. In some circumstances, your homeowners insurance will cover it. However, it is your responsibility to prove that is what caused your HVAC system to malfunction.

Protection is always the best answer when it comes to large investments, such as your HVAC system. Call your trusted HVAC contractor today to discover how you can protect your home utilities. A full house power surge protector will be your best answer to protecting as much as possible against an electrical surge. Your HVAC contractor can offer the best solutions to protecting your HVAC system and avoiding the consequences of not being protected during an electrical power surge.

The Basics Of NATE Certification

When you want to find a HVAC technician you can count on for quality repairs and service, it is essential that you not only ensure they have the right training and expertise to handle the job, but you should also consider choosing a NATE certified technician. NATE certified technicians have exceeded the requirements needed to become a licensed HVAC technician; however, many homeowners don’t know what NATE certification is or how it can benefit them.

What does NATE certified mean?

It is not uncommon for homeowners to not understand the importance of NATE certification. While this is an important designation that is recognized throughout the HVAC industry, both in the US as well as in Canada, it is often something that is a mystery to others. Understanding NATE certification is an important part of knowing how to choose the right HVAC technician. NATE certified technicians are not only more skilled, but they have the commitment to continue to strive for excellence. After all, not all HVAC technicians take the initiative to go above and beyond what is required of them. Fortunately, NATE certification can help set a skilled technician apart from other service technicians in their field.

What is NATE certification?

NATE certification is an important factor in the professionalism and training of a quality HVAC technician. Not only is it essential that the technician study and become extremely knowledgeable in a wide variety of HVAC matters, but they will also be required to pick an area of specialization in which they will need to gain proficiency. The technician will then need to pass a core exam in addition to an exam covering their area of specialization. Whether they choose gas heating, air conditioning, heat pumps or even light commercial refrigeration, this commitment to further education and expertise is definitely a bonus when it comes to hiring a quality HVAC technician.

In addition to providing exceptional heating and cooling services, your NATE certified technician will also be able to provide professional maintenance for your HVAC equipment. Annual AC maintenance is an essential part of protecting your equipment and making sure it will be able to provide reliable cooling during the summer. When quality performance is important, call your professional HVAC contractor and schedule preventative maintenance for your cooling system.

Implement A Smart Summer Energy Savings Plan

Air conditioning can really break the family budget in the summertime. It uses a great deal of a house’s total energy consumption and thus is responsible for a large percentage of your home electricity costs. Yet air conditioning keeps your home cool and comfortable so it is worth the extra expense. The solution is to find ways to use your A/C system in the most effective manner to achieve cool air along with systematic energy savings.
Make sure your home is air tight so that the air conditioner is not blowing out extra cold air that is leaking into the yard, making the unit work harder and longer than it should have to for the house to cool. Caulk your windows to seal them and replace old weather stripping around your outside doors. Check your attic space for any potential air leaks and seal them. If it is not insulated, do it now with R-30 rated insulation. Check your crawl space or foundation wall for cracks or holes allowing air leakage and caulk or plug them.

Inside the home, have a certified HVAC technician do a maintenance checkup on your system before summer starts. This will assure that your unit is in good working order and does not need any parts replaced or repaired. Clean or replace dirty filters then check them monthly so your unit operates at peak efficiency all summer. A/C units functioning as they should use less energy. Keep the return air vent inside your home free of blockages so air circulates through the system properly.

Another big energy saving help for your A/C is running ceiling fans along with it. This enables you to set the thermostat up as much as twelve degrees and still maintain the level of coolness you prefer. That saves a great deal of money. Other tips for your Summer Energy Savings list include swapping out your incandescent light bulbs for new compact fluorescent bulbs and waiting until the evening hours to use your heat creating appliances. Finally, call to learn how energy efficient HVAC system replacement saves more money in energy savings during the summer as part of your HVAC Energy Savings Home Energy Savings.