Archives

Ideal Temperatures To Set Your Thermostat To

The ideal thermostat settings depend on a number of factors, including time of day, level of activity, weather severity, number of room occupants and personal preferences. All of these factors must be considered to get the best results in terms of comfort and energy savings.

Winter

In the wintertime, going about the day indoors at 68°F is ideal. It keeps everyone comfortable despite the subzero temperatures outside without overly taxing the heaters. Savings can be gained by letting the temperature drop a little between 9 am to 5am which is the traditional time when people are in their offices and schools. A drop of 15 degrees is reasonable. It keeps the house relatively warm. The temperature can be pulled up again after residents go back from their work and school duties.

Summer

In the summertime, a thermostat setting of 78°F will not be out of place. It is considerably cooler than noontime peaks of around 100°F or more in certain regions. Again, this can be adjusted to warmer temperatures during office hours when the house is empty, except possibly for pets. The same is true for bedtime since sleep is a largely sedentary activity. The body is easier to cool down at this point than at any other time during the day. What’s more, a low temperature setting will only make it harder to get up in the morning as it will feel very chilly.

Importance Of A Thermostat

All of these adjustments can be difficult to keep track of. Install a programmable thermostat to keep life simple. These small and inexpensive units can be programmed to change the temperature in a room automatically depending on the time of the day. Enter the average ideal thermostat settings for the season and let it do the work.

A good thing about programmable thermostats is that although they can change the temperature automatically, the values are not set in stone. Homeowners can quickly override the settings for an unusually hot day or a particularly chilly evening. These may not happen often, but it’s nice to know that you can make the adjustments on the fly if you need to.

Keep following our blog for more heating and air conditioning tips.

Viable Factors To Consider When Choosing New Air Conditioner Or Heater

The choice of a heater or air conditioner for your home or building is an important decision to make. Therefore care must be taken to avoid making rush decisions that will have negative effects on your life. With this in mind, we have prepared a list of things that you should always consider when choosing a new heater or when choosing new air conditioner.

The refrigerant in use is always useful. With regulations on environmental friendly use of resources, it is wise to avoid refrigerants that deplete the ozone layer thus contributing largely to global warming and climate change. Efficient and environmental friendly refrigerants like R410a should be used. This will ensure you observe your responsibility to your environment and at the same time leading a quality life.

Maintenance is usually a consideration that you cannot avoid. Different systems will require different levels of maintenance. There are companies that will offer maintenance for their products for a specified period of time. These are very good companies to work with as they ensure the system remains highly efficient at all time. When these contracts are over, you are required to continue maintaining the equipment as required for best results.

The cost of the system is a major thing to look out for. This is to make sure that the buyer gets value for their money. Therefore, you may be required to compare prices offered by different manufacturers or sellers and make the best choice. With this in mind, it is wise to browse through information on different products, their manufacturers and sellers and make an informed choice.

Refund opportunities are usually not considered when choosing new air conditioner. However, they may be useful to you since you may end up choosing a heater that will not work well in your building. It is advisable to find out more about any refund programs set up by the state or even by the manufacturers. It would be sad to lose out on getting a refund on a very expensive piece when the state can refund a certain percentage or even the whole amount of purchase.

The efficiency rating of the system when choosing a new heater should be highly put in mind. This has a direct effect on the level of electricity or energy consumption and therefore the extent of your power bills. Choosing new air conditioner should therefore be guided by the energy efficiency. The rating is usually indicated but if not, you can always ask the seller.

Decision making when it comes to choosing a new heater or choosing new air conditioner may present several challenges. That is why experts in this field are readily available to guide you and make sure you are fully satisfied with the decision you make. If you require some consultation, please find time and call us. We will readily help you with what you need.

Furnace Warning Signs: What They Are And How To Identify Them

You can, usually, tell if your furnace is functioning at optimum or not through simple observation, or professional furnace inspection. By checking your furnace’s filters, vents and other part’s condition, you can identify furnace warning signs that indicate your furnace is functioning less efficiently. HVAC professionals can, of course, detect more technical problems, during the inspection of the furnace.

Warning signs of a faulty furnace

Funny odors

Funny odors, emitted by your furnace, are a sign that one or more parts of the furnace are not in proper shape and are, therefore, not functioning properly. Such odors could emanate from dirt on dirty or clogged filters, obstructed airflow, gritting metallic parts, and or burning furnace parts. Simple nut adjustments or cleaning/ unclogging of filters and vents can rectify the problems. In other instances, only professional HVAC attendants can detect the real problem and rectify it.

Unstable thermostat readings

Your furnace’s thermostat regulates the degree at which your furnace can heat your indoor air. Absence of change in indoor air temperature whereas the reading on the thermostats has changed, or overheating of indoor air when thermostat readings remain constant, is a sign that your furnace or thermostat is broken. Check your filters, vents and other parts for dirt or obstructions that may be the cause of your furnace malfunction. You can also check your thermostat setting and location to ensure it does not detect heat or cold from other appliances.

Abnormal noises

Before you identify what noises are abnormal with your furnace, you need to know what normal noises your furnace emits, if any. For instance wood furnaces emit crackling sound as the wood burns and occasional sparks, whereas burning gas has a distinct pressure sound. A soft humming or fanning sound may be the only sounds an electric furnace emits from rotating fans or mortar. Any other sounds from your furnace signify something that needs to be fixed.

Conclusion

Obstructed airways, worn out, and dirty furnace parts can inhibit efficient functioning of any furnace. You may sense when your furnace functions less-efficiently from abnormal sounds, odors, flames or sparks, as well as imbalanced indoor air temperature. For all your HVAC needs, including furnace maintenance and repairs, contact your local HVAC contractors.

Tips To Keep The Household Warm During Winter

This winter has been one of the harshest in many years. Heating systems across the country are in full throttle to fight the cold. The harder they work, the greater the chance of failure. It would be quite troublesome for the gas furnace to give out in the middle of a chilly night. Be proactive in taking care of them to minimize the risk of damage. Learn more about the common issues that plague these systems as well as the strategies that can be used to prevent their occurrence.

Clogging is one of the most frequent triggers of heating system malfunction. This can happen in several areas including the air filters and flue pipes. The filters are naturally prone to dirt as it is their job to block these off to maintain good air quality within the system. Over time, the dust and dirt accumulates to a level that causes air flow problems. This can happen slowly if they are isolated in a fairly clean room or fast if there are nearby sources of dust and debris. The only way to know for sure is to check on the filters once in a while. They should be replaced as often as necessary.

Flue pipes, on the other hand, tend to be exposed to debris such as leaves, twigs, and snow drifts. Birds may find them convenient places for nesting and leave things that will block off the openings. These will have to be cleared off at the soonest possible time so that the system doesn’t suffocate from the lack of air. If homeowners suspect deterioration in heating performance, then the pipes should be inspected and cleaned thoroughly.

The thermostat setting should also be given some thought. Pipes are often vulnerable to the extreme outside temperatures because they are situated on the external walls. If the system is not generating enough heat, then the pipes might suddenly burst. This is because ice is less dense than water. The freezing temperatures will cause an expansion. Therefore, it is prudent for people to increase the setting to compensate for the cold. Just a few degrees will go a long way towards keep the pipes intact and the household warm.

Lastly, homeowners must pay attention to the boiler pressure. The water should not exert anything lower than 12 pounds per square inch or anything higher than 15 pounds per square inch. This is the optimal range for the system and going beyond them is a sure sign of trouble. If an anomaly is detected, then the heating contractor should be notified immediately of the situation. A licensed and certified technician from Ideal Comfort of Cucamonga, CA may be sent to verify the observation, locate the source of the problem, and make the appropriate adjustments.

Winterize Your Home And Lower Your Heating Bills

With the rising costs of heating, taking some time to winterize your home and ensure maximum energy efficiency is certainly important. Fortunately, homeowners who want to lower their monthly utility bills can take advantage of some energy saving tips to help them keep heating costs as low as possible. A few preventative measures before the start of the heating season can pay off in monthly savings all winter long.

The importance of a good quality heating system is something that every homeowner should consider. Regardless of what type of heating system you have, you can maximize its energy efficiency by scheduling a professional heater maintenance. A professional HVAC service will be able to provide quality heater maintenance that can help improve efficiency and overall operation. Additionally, a professional heating service can handle repairs, as well as a new heater installation. In fact, you currently have an older furnace or heat pump, a new heater installation can often provide a significant savings with its increased energy efficiency.

If you have a home with drafts, you might be tempted to turn up the thermostat in order to feel warm; however, taking care of the drafts is the best way to keep your home energy efficient for maximum savings. Doors are often a culprit for drafts, but they are also the easiest to fix. You can purchase a simple kit to seal the door frame, but even a rolled up towel kept around the base of the door can provide an excellent seal against heat loss and drafts.

A simple, inexpensive measure to increase heating efficiency can be as easy as changing your furnace filters. A furnace that has clogged or dirty air filters will need to work much harder to provide the heat your family needs. With a clean filter, your furnace will be able to operate more efficiently, which in turn lowers your heating bills.

If you have ceiling fans, you probably only use them to keep your home cool during the summer; however, most ceiling fans have a switch that will allow them to run in reverse. As warm air rises, a ceiling fan that is turning in a clock-wise direction can help push the rising warm air back down where you need it the most.

Hand setting digital thermostat

Another easy way to reduce heating costs is to turn down your thermostat when you leave. While this simple step can help save you money, it can be easy to forget. Fortunately, a programmable thermostat makes it easy to save money by allowing you to program your heating system to automatically keep your home cooler during times when there is no one home.

Fall Maintenance And Preseason Heater Checks

Fall maintenance heating system checks are the best way to avoid stressful surprise breakdowns in the middle of a cold winter while also keeping the system in good operating condition. Checking the system in fair weather and taking care of issues in advance can prevent a great deal of the hassle of requiring technician if something goes wrong in freezing temperatures. Also, with any vital piece of equipment, regularly taking care of the heating system will reduce the chances of trouble when reliance on the equipment is at its peak.

Most emergency winter service calls can be attributed to lack of maintenance. Many consumers procrastinate, only to experience a malfunction and find themselves unexpectedly forced to have their system evaluated and repaired, which is especially inconvenient and often uncomfortable during winter months. Performing regular upkeep on a heating system, however, helps to slow wear on the components and ensure they are operating as they should, preventing many issues that cause failures. Additionally, maintenance can reduce furnace repairs, as problems may be found before they get serious and even more costly to fix. This saves a consumer from the discomfort and higher costs of waiting for the need for repairs in cold weather.

A system that is kept clean and in good condition will be more likely to get through cold seasons without the need to call a technician. A regular maintenance schedule will do a number of things to keep the heating system in optimal working order. For instance, a regular routine will help to ensure that the duct work is clear and free of leaks. When ducts have leaks or are in need of insulation, the heating system will be inefficient. This leads to higher heating costs and harder work for the system overall to perform in warming the home. The extra wear on the system’s components also shortens the life of the parts.

A service technician can also ensure the thermostat is operating properly, checking to ensure the cover is properly installed and has not been nudged out of place, or that dirt has not found its way inside and affected calibration. A technician might also check and clean the heater’s fan blades, if necessary, check the belt on the furnace blower, and lubricate moving parts as applicable for the given system. A check of electrical connections will also help to prevent failures when the system is required.

A preseason heater check is the best way to ensure a heating system is clean and ready for efficient use. A system that is running well will be more cost effective to operate and will perform productively. Avoiding problems before they develop, or catching them early in an inspection, can help to prevent the need for costly emergency repairs when winter arrives.